Skip to main content

Frigate Configuration

For Home Assistant Addon installations, the config file needs to be in the root of your Home Assistant config directory (same location as configuration.yaml). It can be named frigate.yaml or frigate.yml, but if both files exist frigate.yaml will be preferred and frigate.yml will be ignored.

For all other installation types, the config file should be mapped to /config/config.yml inside the container.

It is recommended to start with a minimal configuration and add to it as described in this guide and use the built in configuration editor in Frigate's UI which supports validation.

mqtt:
enabled: False

cameras:
dummy_camera: # <--- this will be changed to your actual camera later
enabled: False
ffmpeg:
inputs:
- path: rtsp://127.0.0.1:554/rtsp
roles:
- detect

VSCode Configuration Schema

VSCode (and VSCode addon) supports the JSON schemas which will automatically validate the config. This can be added by adding # yaml-language-server: $schema=http://frigate_host:5000/api/config/schema.json to the top of the config file. frigate_host being the IP address of Frigate or ccab4aaf-frigate if running in the addon.

Environment Variable Substitution

Frigate supports the use of environment variables starting with FRIGATE_ only where specifically indicated in the reference config. For example, the following values can be replaced at runtime by using environment variables:

mqtt:
user: "{FRIGATE_MQTT_USER}"
password: "{FRIGATE_MQTT_PASSWORD}"
- path: rtsp://{FRIGATE_RTSP_USER}:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:8554/unicast
onvif:
host: 10.0.10.10
port: 8000
user: "{FRIGATE_RTSP_USER}"
password: "{FRIGATE_RTSP_PASSWORD}"
go2rtc:
rtsp:
username: "{FRIGATE_GO2RTC_RTSP_USERNAME}"
password: "{FRIGATE_GO2RTC_RTSP_PASSWORD}"

Common configuration examples

Here are some common starter configuration examples. Refer to the reference config for detailed information about all the config values.

Raspberry Pi Home Assistant Addon with USB Coral

  • Single camera with 720p, 5fps stream for detect
  • MQTT connected to home assistant mosquitto addon
  • Hardware acceleration for decoding video
  • USB Coral detector
  • Save all video with any detectable motion for 7 days regardless of whether any objects were detected or not
  • Continue to keep all video if it was during any event for 30 days
  • Save snapshots for 30 days
  • Motion mask for the camera timestamp
mqtt:
host: core-mosquitto
user: mqtt-user
password: xxxxxxxxxx

ffmpeg:
hwaccel_args: preset-rpi-64-h264

detectors:
coral:
type: edgetpu
device: usb

record:
enabled: True
retain:
days: 7
mode: motion
events:
retain:
default: 30
mode: motion

snapshots:
enabled: True
retain:
default: 30

cameras:
name_of_your_camera:
detect:
width: 1280
height: 720
fps: 5
ffmpeg:
inputs:
- path: rtsp://10.0.10.10:554/rtsp
roles:
- detect
motion:
mask:
- 0,461,3,0,1919,0,1919,843,1699,492,1344,458,1346,336,973,317,869,375,866,432

Standalone Intel Mini PC with USB Coral

  • Single camera with 720p, 5fps stream for detect
  • MQTT disabled (not integrated with home assistant)
  • VAAPI hardware acceleration for decoding video
  • USB Coral detector
  • Save all video with any detectable motion for 7 days regardless of whether any objects were detected or not
  • Continue to keep all video if it was during any event for 30 days
  • Save snapshots for 30 days
  • Motion mask for the camera timestamp
mqtt:
enabled: False

ffmpeg:
hwaccel_args: preset-vaapi

detectors:
coral:
type: edgetpu
device: usb

record:
enabled: True
retain:
days: 7
mode: motion
events:
retain:
default: 30
mode: motion

snapshots:
enabled: True
retain:
default: 30

cameras:
name_of_your_camera:
detect:
width: 1280
height: 720
fps: 5
ffmpeg:
inputs:
- path: rtsp://10.0.10.10:554/rtsp
roles:
- detect
motion:
mask:
- 0,461,3,0,1919,0,1919,843,1699,492,1344,458,1346,336,973,317,869,375,866,432

Home Assistant integrated Intel Mini PC with OpenVino

  • Single camera with 720p, 5fps stream for detect
  • MQTT connected to same mqtt server as home assistant
  • VAAPI hardware acceleration for decoding video
  • OpenVino detector
  • Save all video with any detectable motion for 7 days regardless of whether any objects were detected or not
  • Continue to keep all video if it was during any event for 30 days
  • Save snapshots for 30 days
  • Motion mask for the camera timestamp
mqtt:
host: 192.168.X.X # <---- same mqtt broker that home assistant uses
user: mqtt-user
password: xxxxxxxxxx

ffmpeg:
hwaccel_args: preset-vaapi

detectors:
ov:
type: openvino
device: AUTO
model:
path: /openvino-model/ssdlite_mobilenet_v2.xml

model:
width: 300
height: 300
input_tensor: nhwc
input_pixel_format: bgr
labelmap_path: /openvino-model/coco_91cl_bkgr.txt

record:
enabled: True
retain:
days: 7
mode: motion
events:
retain:
default: 30
mode: motion

snapshots:
enabled: True
retain:
default: 30

cameras:
name_of_your_camera:
detect:
width: 1280
height: 720
fps: 5
ffmpeg:
inputs:
- path: rtsp://10.0.10.10:554/rtsp
roles:
- detect
motion:
mask:
- 0,461,3,0,1919,0,1919,843,1699,492,1344,458,1346,336,973,317,869,375,866,432